X-Rite 890 Color Process Control Densitometer Manual de instrucciones descargar pdf (Pagina 11)

GETTING STARTED

1-3

APPLYING POWER

To apply power to the instrument:

1. Verify that the voltage indicated on the adapter complies with the AC

line voltage in your area. If not, contact X-Rite or your authorized

representative.

2. Insert the small plug from the adapter into the power-input connector on

the instrument.

3. Plug the detachable line cord into the adapter.

4. Plug the line cord into an AC wall receptacle.

IMPORTANT: To extend the life of the internal memory battery, it is

recommended that the instrument remain plugged into AC power. If you are

using a modem, AC power must be applied in order to transmit or receive data.

At initial power-up, the instrument performs a “boot memory test.” The

testing sequence is displayed on the instrument screen. If all internal tests are

OK, Page 1 Main Menu displays—see next page.

Testing Program

boot memory...3

XRite 890 vXXXX

Copyrt 1989—1997

Power Input

Detachable Line Cord

Adapter

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Sin comentarios

X-Rite 890 Color Process Control Densitometer Manual de instrucciones Pagina 11